Dual Axis Inclinometer With Remote Display ZCT-CX01-C

Product Short Description

P/N ZCT-CX01-C
Axis Dual axis
Accuracy 0.05°
Resolution 0.01°
Power supply DC8~36Vol
Total range -10°~+10°
Output Digital
IP Grade IP67
Enquiry

Description

Parameter

How To Order

Download

I. General Description

ZCT-CX01-C is a dual axis, stable performance and anti-shake inclination sensor with remote display which can be applied in pipe jacking machine. It is high accuracy with measuring range ±10 degrees.

 

II. Function

Display: Display the angle information of which connects with the displayer currently and the current output mode (absolute/related output) of the sensor.

Control: Set the absolute zero of the sensor and shift from absolute/related angle output.

 

III. Technical Spec

Parameter

Test Condition

Min Value

Typical Value

Max Value

Unit

Operating Spec

Supply Voltage

8

12

36

V(DC)

Quiescent Current

    @12V     <120      mA

Performance Spec

Measuring Range

2-axis

-10

+10

°

Resolution(1

0.01

°

Display Error(2

±0.05

°

Typical Zero Temperature Drift

-25~+85℃

±0.008

°/℃

Max Zero Temperature Drift

-40~+85℃

±0.86

°

Response Time(3

1

s

Others

Operating Temperature

-40~+85

Waterproof

Displayer

IP65

Tilt Sensor

IP67

Remark 1: Resolution means the smallest angular increment at which a detectable change in output can be measured.
Remark 2: Display error means the difference between displayed value and the corresponding true input value.
Remark 3: Response time means the needed time of the sensor when sensor’s output reaches the 85% of the max output which is caused by the step change of the measured tilt angle.

 

 

IV. System Name

inclinometer-ZCT-CX01-C

1. Power Cable: provide supply for ZCT-CX01-C (8~36V).

2. LED Display Screen of X Axis: display the angle information of X axis which is measured by inclinometer ZCT-CX01-C.

3. LED Display Screen of Y Axis: display the angle information of Y axis which is measured by inclinometer ZCT-CX01-C.

4. Zero Calibration Button: set absolute zero position of the connected inclinomter ZCT-CX01-C.

5. Cable Connected With The Probe: connect with the inclinometer.

6. Mounting Hole: to fix ZCT-CX01-C.

7. Indicated Lamp of Absolute Output: indicate the absolute output of the inclinometer ZCT-CX01-C.

8. Indicated Lamp of Related Output: indicate the related output of the inclinometer ZCT-CX01-C.

9. A/R Button: shift the output mode between absolute output and related output.


For Quotation Or Technical Support, Feel Free To Contact Us. We'll Reply You In 24 Hours.

  • *
  • *
  • *
  • *
  • captcha *


Sending ...