Angle Tilt Sensor/Inclinometer with Remote Display for Dump Truck

Product Short Description

ZCTR02 is a displayer for tilt sensor, inclinometers which researched by Shanghai ZC Tech. It is compatible with the following models: ZT245AN-232, ZCT245AN-TTL, ZCT245AL-232 and ZCT245AL-TTL.

Enquiry

Description

Parameter

How To Order

Download

I. Description

ZCTR02 is a displayer for tilt sensor, inclinometers which researched by Shanghai Zhichuan Electronic Tech Co.,Ltd. It is compatible with the following models: ZT245AN-232, ZCT245AN-TTL, ZCT245AL-232 and ZCT245AL-TTL. Users can set the alarm angle according to one’s requirement. When the received angle value is greater than the alarm angle, ZCTR02 light will power on to alarm. at the same time, the internal relay will be closed, trigger an external control circuit, consequently play a controlling role.

 

II. Technical Data

Parameter

Value

Unit

Remark

Operating voltage range

936

V

DC

Quiescent current

80

mA

Display resolution

0.1

Degree

Baud rate

9600

bps

Operating temperature

-20+60

Operating voltage of relay

Max125

Min60

V

V

AC

DC

Loading capacity of relay

1A 30VDC

0.3A 60VDC

0.5A 125VAC

Outline size

72*72*120

mm

W*L*H

 

III. Definition of Connector

 Definition-of-Connector

PIN1: connect power anode;

PIN2: connect power GND;

PIN3: connect RX of ZCT245-TTLseries;

PIN4: connect TX of ZCT245-TTL series;

PIN5: connect GND of ZCT245 series tilt sensors;

PIN6: connect +5V power supply for ZCT245 series tilt sensor;

PIN7: connect RX of ZCT245-232 series tilt sensor;

PIN8: connect TX of ZCT245-232 series tilt sensor;

PIN9: relay side A1-2 which controlled by X axis, connect external control circuit;

PIN10: relay side A1-1 which controlled by X axis, control external circuit coordinated with A1-2;

PIN11: relay side A2-2 which controlled by Y axis, connect external control circuit;

PIN12: relay side A2-1 which controlled by Y axis, control external circuit coordinated with A2-2.

 

IV. Connect ZCTR02 with TTL Series & 232 Series Tilt Sensors

    1. ZCTR02 connected with tilt sensor ZCT245AN-TTL or ZCT245AL-TTL:

connect-01

2. ZCTR02 connected with tilt sensor ZCT245AN-232 or ZCT245AL-232:

connect-02

Remark:

1. When connected to ZCT245 series tilt sensor as above wiring diagram, please make sure the operating voltage of tilt sensor is +5 V. If not, you need another power supply to this tilt sensor;

2. It can not be simultaneously connected with ZCT245-TTL and ZCT245-232 series tilt sensor. That means when the PIN3, PIN4 connect ZCT245-TTL series tilt sensor, PIN7, PIN8 can not connect ZCT245-232 series tilt sensor, and vice versa;

3. This displayer does not support other Zhichuan sensors.


For Quotation Or Technical Support, Feel Free To Contact Us. We'll Reply You In 24 Hours.

  • *
  • *
  • *
  • *
  • captcha *


Sending ...