Low Cost 1 Axis Tilt Sensor Voltage Output Inclinometer ZCT100BL-V1-LP

Product Short Description

One axis structure, install in vertical. The inner sensor is MEMSIC device. It adopt completely digital design of micro process control technology, add proper ASIC circuit, finally get analog voltage output.

Enquiry

Description

Parameter

How To Order

Download

I. General Description

ZCT100BL-V1-LP is a one-axis low cost tilt sensor which is researched and produced by Shanghai Zhichuan Electronic Tech Co.,Ltd. The product is in one axis structure, install in vertical. The inner sensor is MEMSIC device. It adopt completely digital design of micro process control technology, add proper ASIC circuit, finally get analog voltage output.

 

II. Technical Data

Item

Parameter

Unit

Remark

Measuring range(1

0 90

degree

Output voltage range

0.54.5

V

Output voltage resolution

5

mV

Testing temperature 25±4℃

Output voltage accuracy(2

20

mV

Testing temperature 25±4℃

Output impedance

2K

Ω

Response frequency

2

Hz

Operating voltage(3

5V±0.1V

VDC

Static operating current

<30

mA

Operating temperature

2060

Storage temperature

40+85

Output wire length

≥50

cm

Note 1Please keep the mounting surface vertical to horizontal as possible as you can. Otherwise, the angle you measured will be a little smaller than actual angle.

Note 2Voltage output accuracy means Root Mean Square Value of measured error for several times (≥16 times) during measuring range. Measured error means the difference between measured value and actual value. The formula is as follows;

DATA

n is measured times, it should be ≥16, is measured error for each time.

Note 3: Please keep the stability of input voltage as possible as you can, because it will influence

the product’s voltage output accuracy.

Note 4: Rotate the device as arrow direction, the angle will be increased.If over the measuring range, then it will output max or min voltage.

Note 5The formula of output voltage and angle is as follows;

       Vout = 0.5V +(Angle×4 / 90 V

       Angle is angle value , range is 0.0°~+90.0°

 

III. Installing Size and Connection Definition

Inclinometer-Install

Connection definition

Red ————–5V

Black ————– 0V

Yellow ————–output voltage

 


Item Parameter Unit Remark
Measuring range(1 ~ 90  degree
Output voltage range 0.54.5 V
Output voltage resolution 5 mV Testing temperature 25±4℃
Output voltage accuracy(2 20 mV Testing temperature 25±4℃
Output impedance 2K Ω
Response frequency 2 Hz
Operating voltage(3 5V±0.1V VDC
Static operating current <30 mA
Operating temperature 2060
Storage temperature 40+85
Output wire length ≥50 cm

For Quotation Or Technical Support, Feel Free To Contact Us. We'll Reply You In 24 Hours.

  • *
  • *
  • *
  • *
  • captcha *


Sending ...