Single Axis Analog Inclinometer Tilt Sensor Voltage Output ZCT100BL-V1

Product Short Description

P/N ZCT100BL-V1
Axis Single axis
Total range 0°~90°
Output Analog output
IP Grade IP67
Enquiry

Description

Parameter

How To Order

Download

I. General Description

ZCT100BLV1 is a single-axis tilt sensor with low cost researched and produced by Shanghai Zhichuan Electronic Tech Co.,Ltd. This product is in single axis structure, installed vertically. 0.54.5V analog output.The inner sensor is MEMSIC device. It adopt completely digital design of micro process control technology, add proper ASIC circuit, finally get analog voltage output.

 

II. Specifications (Testing temperature default is 25±3℃)

Item

Parameter

Unit

Remark

Measuring range(1

0 90

Degree

Output voltage range

0.54.5

V

Repeatable accuracy

0.3

Degree

Output voltage resolution

4.4

mV

Output voltage accuracy(2

22

mV

Output impedance

2K

Ω

Response frequency

2

Hz

Operating voltage(3

24

VDC

Or 712

Static operating current

<40

mA

Zero temperature drift

±1.5

Degree

2060

Operating temperature

2060

Storage temperature

40+85

Output wire length

50

cm

Note 1: Please keep mounting surface of device vertical to horizontal plane. Otherwise, it will caused measuring range smaller than actual angle.

Note 2: Voltage output accuracy means Root Mean Square Value of measured error for several times (≥16 times) during measuring range. Measured error means the difference between measured value and nominal value. The formula is as follows; , n is measured times, it should be ≥10 is measured error for each time.

Note 3: Please keep the stability of input voltage as possible as you can, because it will influence the product’s voltage output accuracy.

Note 4: Rotate device according to arrow’s direction, angle will be increasing. If over range, it will output 0.5V.

Note 5: The calculation formula of output voltage and angle is as follows;

Vout = 0.5V +(Angle×4 / 90 V,  Angle value is available from 0.0°to 90.0°.

 

III. Module Installment Size and Definition of Connection

Module-Installment-Size-and-Definition-of-Connection

Definition of Connection:

Red wire    ————– +24V

Black wire   ————– 0V

Green wire ( or Yellow)   ————– voltage output


ZCT100BL-V1specification

For Quotation Or Technical Support, Feel Free To Contact Us. We'll Reply You In 24 Hours.

  • *
  • *
  • *
  • *
  • captcha *