Dual Axis Tilt Switch with Bubble ZCT215L-LQS-A1G-4007, Tilt Sensor Used for Aerial Lift

Product Short Description

P/N ZCT215L-LQS-A1G-4007
Axis Dual axis
Accuracy 0.1°
Resolution 0.04°
Power supply DC8~30Vol
Total range ±15°
Output Relay & RS232
IP Grade IP67
Enquiry

Description

Parameter

How To Order

Download

I. General Description

ZCT215L-LQS-A1G-4007 is a new generation cost-effective dual axis tilt switch researched and developed by ZC Technology. This product is based on the 32-bit high-performance microprocessor, which is calibrated to the zero deviation and sensitivity deviation of the sensor to ensure the reliability and consistency. The sensor comes with its own blister, by looking at the water bubble position and setting the zero button, so as to meet the requirements of the site and be convenient to the user.

 

Ⅱ. Features

Built-in 32-bit microprocessor, faster operation speed.

Non-contact sensitive components, longer life.

 

Ⅲ. Application

Tower crane tilt monitoring;

Electric wheelchair automatic leveling tilt monitoring;

Aerial work platform tilt monitoring.

 

Ⅳ. Technical ParametersTypical values is under room temperature 25℃, unless special marked

1. Electrical parameters

Item

Condition

Min.

Typical

Max.

Unit

Supply Voltage

DC

8

24

30

V

Static working current

Horizontal non-load Vcc=12V

25

35

mA

Horizontal non-load Vcc=24V

20

30

Alarm output

Within alarm angle range

Electronic switch on, output voltage slightly smaller than VCC, max current 1A.

Beyond alarm angle range

Electronic switch off, high-impedance state.

2. Performance parameters

Item

Condition

Min.

Typical

Max.

Unit

Measure range

±15

°

Alarm angle

 

Defaulted

X:2, Y:3

°

Can be customized

1

Customized

15

Resolution(1

Room temp. 25°

0.03

0.04

0.05

°

Accuracy(2

Room temp. 25°

±0.1

°

Absolute zero point deviation

Room temp. 25°

±0.2

±0.5

°

Zero drift

Working temp. range

±0.5

±0.86

°

Alarm delay

Defaulted

1.5

S

Can be customized

Customized

Recovery delay

Defaulted

0

S

Can be customized

Customized

Storage temp. range

-40

+85

Working temp. range

-30

+60

IP grade

IP67

Housing material

Plastic

Cable length

Defaulted

0.15

0.2

0.25

M

Remark 1: Resolution is the minimum amount of change that the sensor can detect in the measurement range.

Remark 2: Accuracy is the difference between the output value of the sensor and the true corresponding input value.

 

. Instruction and Wire Definition

1. Housing dimensionunit: mm: defaulted horizontal mounting

Housing-dimension

2. Spring base picture.

Spring-base-picture

 

3. Wire definition

Wire-definition

Color

Red

Black

Yellow

PIN

1

2

3

Function

Power supply VCC

Power supply GND

Alarm signal

4. Instruction

  • status indication

When the product powered on first time, the indicator light flashes red and green twice alternatively, then green or red light normally on. (Green light on indicates the tilt angle is under non-alarm state, electrical switch on; when red light on indicates the tilt angle is under alarm state, electrical switch off.)

After tilt angle is continuously larger than the preset alarm angle for 1.5s (alarm delay 1.5s), the inside electrical switch off, alarm signal cable output is high-impedance state. After green light flashes, the green light off, red light on.

Once the tilt angle is smaller than the preset alarm angle (Recovery delay 0s), inside electrical switch on, alarm signal cable output is close to supply voltage. ( Due to overload protection device inside, the output voltage is always slightly smaller than supply voltage) Now the green light is stays on, red light stays off.

  • zero point

Cooperate with blister status, user can set relative zero point by zero button. After press zero button, indicator light flashes between red and green alternatively, last 4 second, the indicator light turns to orange, which means zero set success. Release the button, the green light stays on, red light stays off.

Product order information: ZCT215L-LQS-A1G-4007 Cable length can be customized.

AccessoryDEUTSCH connector 4pin male DT04-4P.

 


For Quotation Or Technical Support, Feel Free To Contact Us. We'll Reply You In 24 Hours.

  • *
  • *
  • *
  • *
  • captcha *


Sending ...